ACAR 1361.5 MCM 54/7

Tipo de Pago:	L/C,T/T,Money Gram,Western Union
Incoterm:	FOB,CFR,CIF,FCA,CPT
Cantidad de pedido mínima:	1000 Meter

 ACAR 1361.5 MCM 54/7

Información básica

Modelo: ACAR

Marca: HUAYUAN YONGTONG

Información adicional

Paquete: Tambor

productividad: 1000km/M

transporte: Ocean,Land,Air

Lugar de origen: Beijing, China

Apoyo sobre: 1000km/M

Certificados : CE,CCC,ISO

Hafen: Tianjin Port,Shanghai Port,Beijing

Tipo de Pago: L/C,T/T,Money Gram,Western Union

Incoterm: FOB,CFR,CIF,FCA,CPT

Descripción

Especificación

ITEM	DESCRIPTION	UNIT	SPECIFIED		OFFERED
A	GENERAL
A.1	Manufacturer		indicate		Beijing Huayuan Gaoke Cable Co.,Ltd.
A.1	Commercial initials		indicate		Beijing Huayuan
A.2	Address		indicate		Beijing city
A.3	Country		indicate		CHINA
B	CONDUCTOR FINISHED
B.1	Conductor type		ACAR		ACAR
B.2	Code name		ACAR 1361,5 MCM 54/7		ACAR 1361,5 MCM 54/7
B.3	Standards that fulfill		ASTM B-524		ASTM B-524
B.4	Cross section area	mm2	689.88		689.88(nominal)
B.5	Nominal external diameter	mm	34.15		34.15
B.6	Nominal unit weight	kg/m	1.902		1.902
B.7	Minimum breaking strength	kg	1,165		1,165
B.8	Number of aluminum wires 1350 - H19	c/u	54		54
B.9	Number of aluminum alloy wires 6201-T81	c/u	7		7
B.10	Final elasticity module	kg/mm2	indicate		5500
B.11	Linear expansion coefficient	1/ºC	indicate		23.0×10-6
B.12	A.C. Electrical resistance , 50 Hz at 25ºC	Ohm/km	indicate		≤0.0453
B.13	Wiring direction		Derecha		RIGHT
C	WIRE OF ALUMINUM ALLOY 6201 - T81
C.1	Standards that fulfill		ASTM B-398		ASTM B-398
C.2	Nominal diameter	mm	3.79		3.79
C.3	Minimum conductivity at 20ºC	%IAC	indicate		52.5
C.4	Minimum average breaking strength
C.4.1	- Before wiring	MPa	indicate		315
C.4.2	- After wiring	MPa	indicate		302
C.5	Minimum average elongation in 254 mm
C.5.1	- Before wiring	%	indicate		3.0
C.5.2	- After wiring	%	indicate		2.8
C.6	Type of welding and welding wire treatment		indicate		cold-pressure welds or cold-upset welds
C.7	Minimum tensile strength on welded wire	MPa	indicate		290
C.8	Coefficient of linear expansion	1/ºC	indicate		23.0×10-6
D	WIRES OF ALUMINUM 1350 - H19
D.1	Standards that fulfill		ASTM B 230		ASTM B 230
D.2	Nominal diameter	mm	3.79		3.79
D.3	Minimum conductivity at 20ºC	%IAC	indicate		61.0
D.4	Minimum average breaking strength
D.4.1	- Before wiring	MPa	indicate		165
D.4.2	- After wiring	MPa	indicate		153
D.5	Minimum average elongation in 254 mm
D.5.1	- Before wiring	%	indicate		2.1
D.5.2	- After wiring	%	indicate		2.0
D.6	Type of welding and welding wire treatment		indicate		cold-pressure welds or cold-upset welds
D.7	Minimum tensile strength on welded wire	MPa	indicate		145
D.8	Coefficient of linear expansion	1/ºC	indicate		23.0×10-6
E	REELS
E.1	Nominal length of conductor strip	m		>= 2,000	2000
E.2	Gross spool weight including conductor and lathing	kg		indicate	3942
E.3	Outer Diameter on lathing	cm		indicate	110
E.4	Diameter of the flange (flange)	cm		indicate	220
E.5	Diameter of the drum	cm		indicate	220
E.6	Inside width between flanges (flanges)	cm		indicate	104
E.7	Outside Width	cm		indicate	120
E.8	Diameter of the hole for the shaft	cm		indicate	12.5
E.9	Number of bolts (tensioners) of flanges (flanges)	each		indicate	8
E.10	Material from which the reel is made	each		Metallic	steel-wooden